Johnson Controls TEC3600 BACnet Networked Thermostat

Thermostat Capabilities

Communication

Wired networked (RS-485 bus to building automation system); local backlit LCD UI

Communicating Compatibility

Field-selectable BACnet MS/TP or N2 networked controller; integrates with Johnson Controls Metasys BAS for remote monitoring/programming. N2-to-BACnet upgradable without hardware change.

C-Wire

N/A — commercial controller wiring (not a residential 24V C-wire device)

Voice Assistants

None (commercial BMS device, not a consumer smart thermostat)

Zoning

Designed for zoning equipment — controls VAV boxes, fan coils, cabinet unit heaters, hydronic reheat valves

IAQ Sensors

Some TEC3600 models offer optional occupancy sensor (TEC3xx1/TEC3xx3 variants); the -14-000 reviewed does not include occupancy sensor

Geofencing

None

BMS / BACnet

Yes — native BACnet MS/TP (field-selectable with N2). Networked thermostat controller for BMS integration (up to 100 devices per NAE, 4,000 ft max bus). TEC3600 adds 0-10 VDC proportional output for hydronic reheat valves, pressure-dependent VAV, 2/4-pipe fan coils, and zoning equipment.

Dealer Portal

Programmed/commissioned via Johnson Controls Metasys BAS tools (controls-contractor workflow); no consumer dealer app

Pro Features

USB port for rapid configuration cloning; built-in BACnet schedule object; optimal start; on/off, floating, proportional 0-10 VDC and single/two-stage control; backlit LCD; remote monitoring/programming via BAS